Expert Answers about Trailer Jack

• Trailer Jacks Manufactured in the USA
• There are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options: Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. # DL22800 Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. # DL22560 A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530 Pull...
  view full answer...


• Best Bolt-on Corrosion Resistant Trailer Jacks for Boat Trailer
• I have a few options that may work for you, however, we are not aware of any stainless steel jacks on the market since the discontiuned SeaSense jack. Since you are using this jack with your boat, I recommend looking at the Fulton F2 Swing-Up, Wide-Track Trailer Jack # F1413040134. This jack features an aluminum alloy construction, and is made for marine, recreational and utility trailers. The inner and outer aluminum alloy tubes prevent rust even in the harshest environment. For a more...
  view full answer...


• Are the etrailer Electric Jack Trailer Jacks Dependable
• Our etrailer Electric Jacks Electric Jack w/ Footplate # EJ-3527-BBX are made by Pacific Rim. They also manufacture the Ram Jacks right alongside the etrailer.com jacks. Ram is a well known brand of dependable jacks in the industry and many trailer builders use them so for that reason we decided to partner with them for our electric jacks. Below is a video for additional information.
  view full answer...


• USA Made A-Frame 2,000 Lbs Top Wind Trailer Jack
• I reached out to my contact at Future 2 Solutions and he advised me that the Ultimate Trail A-Frame Jack # 322-RDJ-2K is made overseas. If you are looking for a USA made A-frame trailer jack, the Dutton Lainson jacks are all made in the USA. The A-Frame Trailer Topwind Jack # DL22781 has a 2,000lb weight rating and no drop leg like the # 322-RDJ-2K you inquired about.
  view full answer...


• Where is the etrailer Swivel Jack # MJ-1500B-DWL Manufactured?
• While we do have some great U.S.A.-made boat trailer jacks, the etrailer Round Swivel Marine Jack # MJ-1500B-DWL is manufactured in China. However, for a super close U.S.A.-made model, I recommend the Dutton-Lainson Swivel Marine Jack # DL67MR. This jack comes with the same 1,500 pound weight capacity and a similar bracket heights of 13" (retracted) and 23" (extended). As far as compatibility, the jack fits trailer tongue heights up to 24-3/4" inches tall and square trailer tongues up...
  view full answer...


• A-Frame Mounted Tongue Jack With 5,000LB Capacity That is Made In The USA
• The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option # TV94FR is made in China. If you are looking for a manual jack with 5,000lb rated capacity that is made in the USA we have the A-Frame Trailer Jack by Dutton-Lainson # DL22772. This jack also has a black powder coat finish.
  view full answer...


• Is Weld-On Bracket For Fulton F2 Swing-Up Jack Made Of Aluminum Or Steel
• I spoke with my contact at Fulton and they told me that the weld-on bracket, part # F500277 for the Fulton F2 Swing-Up Trailer Jack, part # F1413100334, is made of steel. The jack has anodized aluminum alloy tubes which will be corrosion-resistant. This jack has a lift height of 10 inches and will work on trailer tongues that measure 4 X 5 inches.
  view full answer...


• Recommendation for Flexible Amber Reflector Tape to Wrap Around My Trailer Jack
• This reflector is flexible and will be able to wrap around your jack with its adhesive backing. If you wanted to span the entire circumference of your jack you would need to get a quantity of 3. Per the equation of circumference C=2pr your jack give me a circumference of C=6.28.
  view full answer...


• What are the Gears Made Of in Pro Series Square 8K Swivel Trailer Jack
• The gears inside the Pro Series swivel trailer jack # PS1400860383 are raw steel lubricated with grease. I have linked a video review of this jack for you.
  view full answer...


• What is the Country of Origin for the Stromberg Carlson Electric A-Frame Trailer Jack # JET-5000
• Stromberg Carlson has headquarters in Michigan, but the Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black Item # JET-5000, is manufactured in China. This bolt-on electric jack offers a 5000-lb lift capacity and carries a 2-Year Warranty. This jack has great customer reviews.
  view full answer...


• Are There Any American Made Trailer Tongue Jacks Available?
• We do indeed carry American made jacks. You will want to check out the Dutton-Lainson line. All of their jacks are made here except the Model 7201 # DL22320 and Model 3400 # DL22300. With that said, if you are specifically looking for an A-Frame jack, you will want to check out the Dutton-Lainson A-Frame Trailer Jack - Topwind - 5,000 lbs. # DL22772. This will have 14" of lift , but does not include a foot plate. If you prefer a foot plate, you will want the # DL22542, but if you wanted...
  view full answer...


• A-Frame Trailer Coupler w/ Round Jack Hole That is Made in the USA
• This A-Frame Trailer Coupler w/ Round Jack Hole # CA-5280-RB is manufactured in China. We do have similar options like the Buyers Products A-Frame Trailer Coupler w Jack Hole # 3370091595 and Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole # 12660-97SP that are both made in the USA if that is what you are looking for.
  view full answer...


• What Is the Weight of the Jet-5000 Electric Trailer Jack?
• The weight of the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black Item # JET-5000 is 29 lbs. Let me know if you have further questions about this electric jack.
  view full answer...


• Origin Of Stromberg Carlsone Electric Trailer Jack # JET-5000
• I reached out to the manufacturer that is headquartered in Michigan and the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black # JET-5000 is made in China. This is a very nice jack with great customer reviews. I've attached a video for your convenience.
  view full answer...


• 2,000 Pound A-frame Trailer Jack thats Made in the USA
• Curt trailer jacks like part # C28200 are all made in China. A lot of trailer jacks are but we do have the Dutton-Lainson which has similar specs to the Curt and is made in the USA if that's what you're looking for. Look at part # DL22781. It has the same 2,000 pound capacity with 14 inches of travel and fits the standard A-frame bolt pattern just like the Curt.
  view full answer...


• Camco and Valterra Trailer Tongue Jack Stand Material
• The Camco Trailer Tongue Jack Stand # CAM44635 is made of resin and the Valterra part # A10-0900 is also made of a plastic/resin. Since the Valterra has a base that is about an inch wider in diameter that would be what I would go with if I were you since the wider the base the more stable it would be.
  view full answer...


• Recommended Trailer Jack That is Made in the USA
• Any of our parts that are manufactured in the USA have that noted in the item description. If you're looking for an American made product, the Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs # DL22800 is a great choice. These are manufactured in Hastings, Nebraska and are one of the best selling brands when it comes to trailer jacks. If that jack won't work for your application, just let me know what size you're looking for and I'm happy to find...
  view full answer...


• Materials Used to Construct Bulldog # BD195369 Square Tube 3K Trailer Jack
• The Bulldog # BD195369 3K capacity square tube jack you referenced is constructed of steel. The inner tube is zinc plated for extra corrosion resistance, the outer tube is gray painted steel. I've linked you to our FAQ article about trailer jacks, which I hope you'll find helpful.
  view full answer...


• Brainstorming Sidewind Trailer Jack for 2 Inch Receivers On Cargo Trailer Corners For Stabilization
• Interesting. We don't have that specifically, but there are a couple of routes you could go. Most trailers will use the Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1 # TJSC-24 for stability in the corners so you could mount a receiver shank to that and use # TJSC-24-HD as a sidewind crank. It sounds like you were picturing more of a trailer tongue style option, so you could use a jack like the etrailer Square Jack w/ Footplate - Drop Leg - Bolt On - Zinc - Sidewind - 29-1/8"...
  view full answer...


• Is the Round Snap Ring Swivel Jack w/ Footplate Made In the USA
• The Round Snap Ring Swivel Jack w/ Footplate part # TJBB-2001-B is a price point option therefore made overseas. If you are looking for a USA made jack we do have some options from Dutton-Lainson which are attached below. I recommend the Pull Pin, Easy Swivel Trailer Jack part # DL22800.
  view full answer...